Touch Screen Software; Fig. 9-10: Updd Setup Programs For The Touch Screen; Fig. 9-11: Dialog Window To Set The Touch Screen - Bosch Rexroth IPC 40.2 Project Planning Manual

IPC 40.2
9.2

Touch Screen Software

DOK-SUPPL*-IPC*40.2***-PR02-EN-P
In the displays VDP 16.1BB, VDP 16.1AC as well as VDP 40.1BE and
VDP 40.1AG a touch screen is used, that allows the operation via the
touch-sensitive surface of the displays.
To ensure the communication of the touch screen controller with the PC,
the serial interface XCOM2 is used. Therefore, concerning devices with
touch screen the XCOM2 interface is not situated on the connector panel.
The required driver software is already installed ex works. Changes are
possible in the application "Pointer Devices" in the Windows Control
Panel. You can reach the same setup program via "Start -> programs ->
UPDD -> Settings.
Fig. 9-10: UPDD setup programs for the touch screen
A dialog window appears for the different settings:
Fig. 9-11: Dialog window to set the touch screen
For further information please select the Help button on the respective
tab.
Via "Start -> Programs -> UPDD" you reach further useful programs, if
required.
9-11
Software
UPDD_start.bmp
UPDD_settings.bmp