Siemens SINAMICS S120 Commissioning Manual page 67

2. Call the shortcut menu "Know-how protection drive unit > Activate".
3. If you want to activate the copy protection in addition to know-how protection, then click
4. Click on "Assign".
5. In the "New password" field, enter the password (1 to 30 characters) once. Pay attention
6. Re-enter your password in the "Confirm password" box and click "OK" to confirm the
7. Click "OK" to confirm the settings you made.
Commissioning Manual
Commissioning Manual, (IH1), 01/2013, 6SL3097-4AF00-0BP3
The "Activate know-how protection for drive unit" dialog box opens.
Figure 2-2 Activating know-how protection
on the "Know-how protection with copy protection" option.
The "Know-how protection for the drive unit - assign password" dialog box opens.
Figure 2-3 Setting the know-how protection password
to upper and lower case.
entry.
The dialog box is closed and the password is shown in encrypted form in the "Activate
know-how protection for drive unit" dialog box.
The "Copy RAM to ROM" option is automatically active and ensures that the know-how
protection is permanently stored in the Control Unit. If you want to only temporarily
activate know-how protection, you can deactivate this option.
Know-how protection is now activated. The text "Know-how protected" is in all protected
parameters of the expert list instead of the content.
Commissioning
2.2 STARTER commissioning tool
65