Terminal Module; Terminal Module Tm15 - Siemens SINAMICS S120 Commissioning Manual

Diagnostics
3.1 Diagnostics via LEDs
LED Color
Green/
orange
or
Red/
orange
3.1.4

Terminal Module

3.1.4.1

Terminal Module TM15

Table 3- 43 Meanings of the LEDs on the Terminal Module TM15
LED Color
READY -
Green
Orange
Red
Green/red
Green/
orange
or
Red/
orange
268
State Description, cause
Flashing light Component recognition via LED is activated (p0154).
Note:
Both options depend on the LED status when module
recognition is activated via p0154 = 1.
Status
Off Electronics power supply is missing or outside permissible
tolerance range.
Continuous The component is ready for operation and cyclic DRIVE-
light CLiQ communication is taking place.
Continuous DRIVE-CLiQ communication is being established.
light
Continuous At least one fault is present in this component.
light
Note:
The LED is activated regardless of whether the
corresponding messages have been reconfigured.
Flashing light Firmware is being downloaded.
0.5 Hz
Flashing light Firmware download is complete. Wait for POWER ON
2 Hz
Flashing light Component recognition via LED is activated (p0154).
Note:
Both options depend on the LED status when component
recognition is activated via p0154 = 1.
Description, cause
Commissioning Manual, (IH1), 01/2013, 6SL3097-4AF00-0BP3
Remedy
–
Remedy
–
–
–
Remedy and
acknowledge fault
–
Carry out a
POWER ON
–
Commissioning Manual