Profinet Components - Siemens SINAMICS S120 Commissioning Manual

Preparation for commissioning

1.4 PROFINET components

1.4 PROFINET components
For communication via PROFINET, the following components are necessary:
● A communication module for programming device/PC connection via the PROFINET
Note
Cables that can be used for commissioning
For commissioning using the STARTER commissioning tool, the onboard Ethernet
interface of the Control Unit can be used with a crossover cable from CAT5 and higher.
The PROFINET module CBE20 supports all standard Ethernet cables and crossover
cables from CAT5/5e and higher.
● Connecting cable
● Connector
24
interface.
Connecting cable between PROFINET adapter and programming device/PC, such as
– Industrial Ethernet FC TP Standard Cable GP 2 x 2 (up to max. 100 m)
Standard bus cable with rigid conductors and a special design for fast installation
Order No.: 6XV1840-2AH10
– Industrial Ethernet FC TP Flexible Cable GP 2 x 2 (up to max. 85 m)
Order No.: 6XV1870-2B
– Industrial Ethernet FC Trailing Cable GP 2 x 2 (up to max. 85 m)
Order No.: 6XV1870-2D
– Industrial Ethernet FC Trailing Cable 2 x 2 (up to max. 85 m)
Order No.: 6XV1840-3AH10
– Industrial Ethernet FC Marine Cable 2 x 2 (up to max. 85 m)
Order No.: 6XV1840-4AH10
Connector between the PROFINET adapter and the PG/PC, for example
– Industrial Ethernet FC RJ45 Plug 145 for Control Unit
Order No.: 6GK1901-1BB30-0Ax0
Commissioning Manual, (IH1), 01/2013, 6SL3097-4AF00-0BP3
Commissioning Manual