Data Backup; Connection - Sony IXS-6700-C Installation Manual

2-4. Data Backup

The table data that are set from the personal computer (to be abbreviated as PC hereafter) are stored in the
RAM on the CA-65 board. Backing up the stored data is recommended in the case of emergency such as
data are damaged or lost.
Backing up the stored data is performed using the software BZR-20 supplied with the IXS-6700/IXS-
6600.

2-4-1. Connection

Connect the equipment as shown below for uploading and downloading the stored data.
IXS-6700/IXS-6600
(Primary Station)
Remote Control Panels
1-4
Method of connecting each BZR-20 that is shown in the illustration, and the stored data that can be
uploaded and/or downloaded are described below.
BZR-20 Connection
BZR-20-1 REMOTE3 connector
of the IXS-6700/IXS-6600
and a PC
BZR-20-2 Primary station (BZR-IF810-1)
and a PC
BZR-20-3 Primary station (BZR-IF810-2)
and a PC
BZR-20-4 NETWORK connector of the
primary (IXS-6700/IXS-6600 )
station and a PC
IXS-6600/6700
BZR-20-1
Routing Switcher 1-2
RS-232C
NETWORK
S-BUS
BZR-20-2
BZR-IF810-1
RS-232C
Remote Control Panels
5-8
Connection method
RS-232C crossover cable
(9-pin to 9-pin)
RS-232C crossover cable
(9-pin to 9-pin)
RS-232C crossover cable
(9-pin to 9-pin)
Ethernet
BZR-20-4
Ethernet
NETWORK
BZR-20-3
RS-232C
BZR-IF810-2
Remote Control Panels
9-12
Setup data that can be
uploaded/downloaded
The various setup data of the primary
station (IXS-6700/IXS-6600),
the Routing Switchers 1 to 2,
the Remote Control Panels 1 to 4,
and the BZR-IF810-1 to 2
The various setup data of the Remote
Control Panels 5 to 8, and the BZR-
IF810-1
The various setup data of the Remote
Control Panels 9 to 12, and the BZR-
IF810-2
The various setup data of the primary
station (IXS-6700/IXS-6600),
the Routing Switchers 1 to 2,
the Remote Control Panels 1 to 4,
and the BZR-IF810-1 to 2
2-11