Pmc Slot 1 (Single-Width Pmc); Pmc Slot 2 (Single-Width Pmc) - Motorola MVME2400 Series Installation And Use Manual

Refer to
of the PMC connectors. For detailed programming information, refer to the
PCI bus descriptions in the MVME2400 Series VME Processor Module
Programmer's Reference Guide and to the user documentation for the
PMC modules you intend to use.

PMC Slot 1 (Single-Width PMC)

PMC slot 1 has the following characteristics:
Mezzanine Type
Mezzanine Size
PMC Connectors
Signaling Voltage
For P2 I/O configurations, all I/O pins of PMC slot 1 are routed to the
5-row power adapter card. Pins 1 through 64 of J14 are routed to row C and
row A of P2.

PMC Slot 2 (Single-Width PMC)

PMC slot 2 has the following characteristics:
Mezzanine Type
Mezzanine Size
PMC Connectors
Signaling Voltage
For P2 I/O configurations, 46 I/O pins of PMC slot 2 are routed to the
5-row power adapter card. Pins 1 through 46 of J24 are routed to row D
and row Z of P2.
http://www.motorola.com/computer/literature
Appendix B, Connector Pin Assignments
PCI Mezzanine Card (PMC)
S1B: Single width, standard depth (75 mm x 150 mm)
with front panel
J11 to J14 (32/64-bit PCI with front and rear I/O)
V = 5.0Vdc
io
PCI Mezzanine Card (PMC)
S1B: Single width, standard depth (75 mm x 150 mm)
with front panel
J21 to J24 (32/64-bit PCI with front and rear I/O)
V = 5.0Vdc
io
Block Diagram
for the pin assignments
3-21
3