Hardware/software
8.1 Hardware requirements
8.1.2.3
SINUMERIK 840D sl (solution line) probe connection to X122, NCU 7x0
Probe connection to X122, NCU 7x0
The prerequisite for measuring on X122 is set machine data
MD 13210: MEAS_TYPE = 0.
For more detailed information on contact routing, electric characteristics, commissioning
using configuration macros, and additional material needed, see:
References:
/GDsl/ SINUMERIK 840D sl NCU Manual
/IDsl) SINUMERIK 840D sl/SINAMICS S120 CNC Commissioning, Part 1 (NCK, PLC, Drive)
Figure 8-4
8-6
Example of probe connection to NCU 720:
Programming Manual, Release 04/2006, 6FC5398-4BP10-0BA0
Measuring cycles