Table of Contents
Advertisement
(2) Installing the language pack
< NOTE >
・ To install the language pack, you need a recovery DVD and a DVD drive with
USB connection. Prepare before starting work.
Follow the steps below to install the language pack.
1. Connect the DVD drive to the equipment.
2. After starting the OS, set the last disc of the recovery DVD
"HITACHI HJ - 100E - **** Product Recovery DVD" in the DVD drive
(second disc in the case of two-disc sets, the third disc in a case of three-disc sets).
(The underlined part is an example, since the model of the equipment you purchased is
listed, so the content of * differs for each model. For parts that are similarly described
in subsequent procedures, change to the type of equipment you purchased.)
3. If you have not logged on with the computer's administrator account, log on to the
computer with the computer's administrator account.
4. Click Start and then click Control Panel.
5. Click Clock, Language, and Region.
6. Under Regional and Language, click Install or uninstall display languages.
7. The "Install or uninstall display languages" window opens. Click Install display
languages.
8. Under Choose your method of install, click Browse computer or network.
9. Click Browse in Select the display language to install.
10. The "Browse for Files or Folders" window opens. Select the language pack you want
to install from the DVD drive and click OK.
Folder path of language pack is as follows.
Language
English
Japanese
Chinese
(China)
Korean
Portuguese
Thai
※Replace D: with the drive letter of the DVD drive (assuming [D] in the above
example).
11. The display language to be added is displayed in the list, so check the check box of the
corresponding language and click Next.
Culture name
Language pack folder path
en-US
(Installation is unnecessary)
ja-JP
(Installation is unnecessary)
zh-CN
D:\langpacks\zh-cn\lp.cab
ko-Kr
D:\langpacks\ko-kr\lp.cab
Pt-PT
D:\langpacks\pt-pt\lp.cab
th-th
D:\langpacks\th-th\lp.cab
3-11
3. SETUP
Advertisement
Table of Contents
