Hitachi HF-W100E Instruction Manual page 86

3. SETUP
< NOTE >
Rarely you can not type Japanese when typing a password hint.
In this case, type Japanese by the following method.
• Move the input point to Who's going to use this PC and check whether you
can type Japanese. If you can type Japanese, move the input point to
Password hint and check if you can type Japanese.
• If you can not enter Japanese even if the above correspondence is done,
reset password after setup and enter hint of password.
7. Setup will continue.
8. After automatically signing in, please wait as it will display "Setup is starting. Please wait.
The system will restart automatically."
• This processing may take several minutes. Please wait until it is completed.
• Restart after processing is completed.
9. After rebooting, setup is complete. Please sign in to this device.
The Windows® 10 setup procedure has been completed. From this point on, follow the
instruction in "3.2 Configuring Basic Settings after OS Setup" to configure the basic settings
of the OS.
3-6