Click Start And Click Control Panel - Hitachi HF-W100E Instruction Manual

8. MAINTENANCE SERVICES
<Specifications>
• Microsoft® Windows®, device drivers, and commercially available application software
may not be able to be modified directly as a counter measure for a particular failure.
Instead, the Manufacturer may offer a work-around as a counter measure.
• If you add new commercially available hardware to the equipment without notice to the
Manufacturer, the equipment as a whole will lose eligibility for warranty.
• Some components used in the equipment (such as LSIs from Intel corporation) can not be
disassembled for failure analysis because the Manufacturer does not have the right to do
so.
• The price of this equipment does not cover maintenance and support. When you order the
equipment, you must clarify the desired maintenance support level in the maintenance
contract and make the required payment for the maintenance fee defined by the
maintenance support level.
9. WINDOWS® SETTINGS
(1) Applying a Hotfix and Other Updates
<Specification>
• If you need to apply a hotfix, Windows Update, or the latest service pack, do it on your
own responsibility. You must thoroughly check the system operation and evaluate how the
system is affected by applying the hotfix, Windows Update, or service pack.
(2) Power Options
<Specification>
• In case of Windows® Embedded Standard 7, even if you configured the system such that
power for the display is not be turned off in the Power Options (Never is specified for
"Turn off the display"), the power plan can be temporarily switched to High performance
when the Windows Experience Index is triggered automatically and the power for the
display can be turned off.
To prevent the power for the display from being turned off, go through the following step
1 to 6 to disable automatic execution of the Windows Experience Index.
 Procedure to change the settings of the Windows Experience Index

1. Click Start and click Control Panel.

2. Since the Control Panel is displayed, and click System and Security >
Administrative Tools.
3. Double-click Task Scheduler.
4. From the tree in the left pane of the Task Scheduler window, select Task Scheduler
Library > Microsoft > Windows > Maintenance.
5. Right-click WinSAT displayed in the center of the window and select Disable.
C-10