Table of Contents
Advertisement
3. SETUP
3.2.2.3 Setting Up display language
Windows® 10 preinstalled on this equipment can display the language specified from Control
Panel by installing an additional language.
< NOTE >
・ To install additional languages, you need a recovery DVD and a DVD drive
with USB connection. Prepare before starting work.
・ If you want to change the display language to "English" or "Japanese",
installation of additional languages is unnecessary. Please switch the display
language according to "(2) Switching display language".
(1) Installing additional language
Perform the following procedure to install an additional language.
1. Connect the DVD drive to the equipment.
2. After starting the OS, set the last disc of the recovery DVD
"HITACHI HJ-100E-**** Product Recovery DVD" in the DVD drive
(second disc in the case of two-disc sets, the third disc in a case of three-disc sets).
(The underlined part is an example, since the model of the equipment you purchased is
listed, so the content of * differs for each model. For parts that are similarly described
in subsequent procedures, change to the type of equipment you purchased.)
3. Execute the following command from the Command Prompt as administrator.
dism /online /Add-package /Packagepath:d:\langpacks\Microsoft-Windows-Client-
Notes 1: Specify the DVD drive letter for d: (assuming [d] in the command example).
2: Specify the culture name corresponding to the language you want to add for zh-
cn. Correspondence between language and culture name is shown below.
Language
English
Japanese
Chinese (China)
Korean
Portuguese
Thai
4. After the installation has been completed, restart the system.
Culture name
Remarks
en-US
(Installation is unnecessary)
ja-JP
(Installation is unnecessary)
zh-CN
ko-Kr
Pt-PT
th-th
3-20
Language-Pack_x64_zh-CN.cab
Advertisement
Table of Contents
