GE Baker Hughes Masoneilan SVI FF Installation And Operation Manual page 171

Parameter (in bold)
Sub-parameter (Index)
SUPPLY_
PRESSURE_LO_ALERT
(53)
PRESSURE (1)
ALERT_POINT (2)
DEADBAND (3)
ALERT (4)
HISTORIC ALERT (5)
ENABLE (6)
SUPPLY_
PRESSURE_
LOLO_ALERT (54)
PRESSURE (1)
ALERT_POINT (2)
DEADBAND (3)
ALERT (4)
© 2019 Baker Hughes, a GE company, LLC. All rights reserved.
Table 31 Transducer Block Parameters (Continued)
Initial
Mode
Range
Value
0-1034.2 20
0 - 20 0.5
FALSE FALSE
True - FALSE
False
True - TRUE
False
0-1034.2 20
0 - 20 0.5
FALSE FALSE
Description
Not writable for Standard Diagnostics version.
Current SUPPLY_PRESSURE value.
Not writable for Standard Diagnostics version.
SUPPLY_PRESSURE Value, below which the ALERT is set to
True.
Not writable for Standard Diagnostics version.
SUPPLY_PRESSURE change, required to clear the ALERT,
once it was set to True.
Not writable for Standard Diagnostics version.
True if the SUPPLY_PRESSURE has reached below
ALERT_POINT and have not come above
(ALERT_POINT+DEADBAND).
Not writable for Standard Diagnostics version.
True if ALERT is true.
Not changed if ALERT is false.
Not writable for Standard Diagnostics version.
True - Enables the ALERT to be reported according to the
configuration.
False - Disables ALERT reporting.
Not writable for Standard Diagnostics version.
Not writable for Standard Diagnostics version.
Current SUPPLY_PRESSURE value.
Not writable for Standard Diagnostics version.
SUPPLY_PRESSURE Value, below which the ALERT is set to
True.
Not writable for Standard Diagnostics version.
SUPPLY_PRESSURE change, required to clear the ALERT,
once it was set to True.
Not writable for Standard Diagnostics version.
True if the SUPPLY_PRESSURE has reached below
ALERT_POINT and have not come above
(ALERT_POINT+DEADBAND).
Not writable for Standard Diagnostics version.
Masoneilan SVI FF Instruction Manual
| 171
=