Pushbuttons - GE Baker Hughes Masoneilan SVI FF Installation And Operation Manual

Pushbuttons

The local pushbuttons are located behind a hinged cover, directly below the display window.
To open the cover loosen the screw and swing the cover down. Always re-fasten the cover
after use to protect the pushbuttons from environmental contamination.
The three pushbuttons perform the following functions:
Left Button - Marked with
option currently displayed.
Middle Button - Marked
the previous item in the menu or decrement the value currently shown in the digital
display. When used to decrease a displayed value, holding the button down causes the
value to decrease at a faster rate.
Right Button - Marked
the next item in the menu, or to increment the value currently shown in the digital
display. When used to increase a displayed value, holding this button down causes the
value to increase at a faster rate.
NOTE
NOTE
© 2019 Baker Hughes, a GE company, LLC. All rights reserved.
*
, permits you to select or accept the value or parameter
–
, permits you to move back through the menu structure to
+
, permits you to move forward through the menu structure to
An exclamation point (!) in the SVI FF display window indicates
that there is instrument status available.
*
(Select)
Figure 54 SVI FF Display
If the pushbuttons are pushed after being locked by ValVue
software, the message LOCKED appears. Refer to the ValVue
online help for instructions to unlock the pushbuttons.
+
(Forward)
-
(Back)
Masoneilan SVI FF Instruction Manual
| 129
=