View Data Menu - GE Baker Hughes Masoneilan SVI FF Installation And Operation Manual

VIEW DATA Menu

Use the VIEW DATA menu to read the current configuration, calibration, and status
information. This information cannot be changed from the VIEW DATA menu. Figure 59 on
page 140 and Figure 60 on page 141 show the available data.
Viewing Configuration and Calibration Parameters
To view configuration and calibration parameters use the following procedure:
1. Press + to move through the options until you reach the VIEW DATA menu.
*
2. Press
3. To exit from the VIEW DATA menu, press * at any menu line. You return to the last menu
displayed.
© 2019 Baker Hughes, a GE company, LLC. All rights reserved.
to go to VIEW DATA menu. Press
+
to select the VIEW DATA mode.
Masoneilan SVI FF Instruction Manual
| 139
=