Chapter 7: Communications; Communication Interfaces - Slot B; Electrical And Optical Ethernet - GE DR60 Technical Manual

DR60
Digital Recorder

Chapter 7: Communications

1 Communication Interfaces – Slot B
1.1

Electrical and Optical Ethernet

79
This chapter provides detailed information about the communication options and how
to configure them
The DR60 has two Ethernet interfaces that can be either electrical or optical and two
serial interfaces with DB9 female connectors, serial A is RS232 and serial B is RS232.
The DR60 has 2 Ethernet interfaces named Ethernet 1 and Ethernet 2. The table below
describes the usage of each port:
Port
Ethernet 1
Ethernet 2
Both interfaces can be either optical with LC connectors or electrical with RJ45
connectors.
The figure below shown the pinout diagram.
Usage
Configuration, monitoring, GOOSE
publication/subscription, MMS report control
block publication, DNP3, PMU, firmware
upgrade, log and registers download.
Configuration, monitoring, PMU, firmware
upgrade, log and registers download.
DR60-TM-EN-2A