Configuration Tabs; General; Analog - GE DR60 Technical Manual

5

Configuration Tabs

5.1

General

5.2

Analog

5.2.1 Bay Arrangement (MMXU/MMXN)
38
The General configuration tab contains information related to the physical device logical
node (LPHD) of the DR60.
On this screen, it is shown the information of the respective device:
▪
Model (CORTEC)
▪
Vendor (General Electric Company)
▪
Hardware Version
▪
Firmware Version
▪
Serial Number
Moreover, the following parameter can be configured:
▪
Identifier: Up to 61 characters. Possible characters: a-z, A-Z, a-9, _.
▪
Location: Up to 255 characters. Possible characters: a-z, A-Z, a-9, _.
▪
Owner: Up to 255 characters. Possible characters: a-z, A-Z, a-9, _.
▪
LPHD Prefix: Up to 11 characters. Possible characters: a-z, A-Z, a-9, _.
▪
Electric Power System: Up to 255 characters. Possible characters: a-z, A-Z, a-9,
_.
▪
Primary Operator: Up to 255 characters. Possible characters: a-z, A-Z, a-9, _.
▪
Secondary Operator: Up to 255 characters. Possible characters: a-z, A-Z, a-9, _.
▪
Master Resource Identification: Up to 255 characters. Possible characters: a-z,
A-Z, a-9, _.
▪
Latitude: Possible characters: 0.0-90.0.
▪
Longitude: Possible characters: 0.0-180.0.
▪
Altitude: Possible characters: 0.0-10000.0
The Analog configuration tab contains configurations related to the analog channels and
circuits and it is divided into two sub-tabs: Instrument Transformer (TCTR/TVTR); and
Bay Arrangement (MMXU/MMXN).
This window allows the configuration of the analog inputs. The configuration includes
the circuit description tag, association with physical inputs, nominal values for
DR60
DR60-TM-EN-2A