Opening A Pre-Existing Configuration File; Saving A Configuration File; Sending A Configuration File For The Equipment; Tools - GE DR60 Technical Manual

3.4

Opening a Pre-existing Configuration File

3.5

Saving a Configuration File

3.6

Sending a Configuration File for the Equipment

4

Tools

36
User
CFG
ADM
In order to open a pre-existing configuration, click on the <Open> button on the initial
screen of the DR60 Configurator.
It opens the Windows© folder where the configuration files are saved:
Choose the configuration file and the Main Screen of the DR60 Configurator will open,
with the selected configuration file loaded.
It is also possible to open a configuration file from the Main Screen of the DR60
Configurator, by selecting the option Open Configuration on the menu on the Menu
Bar.
To save an opened configuration, select the option Save Configuration or Save
Configuration As, on the File menu of the Main Screen of the DR60 Configurator.
When saving a configuration, the DR60 Configurator will create three different files:
*.CID file: saves the communication and recorders configuration. The DR60 uses the SCL
schema 3.1 from the IEC 61850 data models;
*.st file: saves the logic equation and the matrix of I/O and triggering configuration
according to the IEC 61131 Structured Text Language (STL).
*extref: saves the external references for the GOOSE subscriber configuration.
To send a configuration file to online equipment, select the option Send Configuration,
on the Menu Bar.
The Tools section of the Initial screen presents two different tools:
Log: monitored and downloads the DR60 logs
Administrative Tools: Firmware upgrade, password management, equipment license
upgrade and support file download.
Password
UV@bM8DtqAN
RX8jg3S&mDx
DR60-TM-EN-2A
DR60