GE DR60 Technical Manual page 42

5.4.2 Datasets
42
The configuration of the physical communication ports is carried out though this
subtab.
Each Ethernet port, 1 and 2, have different addresses and it is possible to configure for
each of them:
▪
IP Address
▪
Network Mask
▪
Gateway
The Ethernet ports are used to:
Port
Ethernet 1
Ethernet 2
The default settings are:
Parameter
IP Address
Network mask
Gateway
For the serial ports A (RS232) and B (RS232), the following parameters are
configurable:
▪
Speed
▪
Data Bits
▪
Parity
▪
Stop Bits
The Dataset section is used to create a dataset for GOOSE or Report publishing.
The configurable parameters are described below:
▪
Datasets buttons:
▪
<New>: this buttons creates a new dataset. Clicking on this button, the dataset
parameters will appear for editing.
Usage
Configuration, monitoring, GOOSE
publication/subscription, MMS report control
block publication, firmware upgrade, log and
registers download.
Configuration, monitoring, firmware upgrade,
log and registers download.
Default Setting
Ethernet port 1
192.168.0.199
255.255.255.0
192.168.0.254
DR60
Ethernet port 2
192.168.1.199
255.255.255.0
192.168.1.254
DR60-TM-EN-2A