Siemens SINAMICS S120 Function Manual page 4

®
SINAMICS
3ls
Printing history
Brief details of this edition and previous editions are listed below.
The status of each edition is shown by the code in the "Remarks" column.
Status code in the "Remarks" column:
A New documentation
B Unrevised reprint with new Order No.
C Revised edition with new status
Edition
12.04
06.05
SINAMICSr, SIMOTIONr, SIMATICr, SIMATIC HMIr, SIMATIC NETr, SIROTECr, SINUMERIKr, and
SIMODRIVEr are registered trademarks of Siemens AG. The designations in this documentation whose
use by third--parties for their own purposes may infringe the the rights of the owner.
Additional information is available on the Internet at:
http://www.siemens.de/motioncontrol
Information about SINAMICS S120 is available at:
http://www.siemens.com/sinamics
This publication was produced with Interleaf V 7
©
Siemens AG, 2005. All rights reserved
Order No.6SL3 097- -2AB00- -0BP1
Printed in theFederal Republic of Germany
Documentation
Order No.
6SL3 097--2AB00--0AP0
6SL3 097--2AB00--0BP1
Comments
A
C
Other functions not described in this documentation might be
executable in the control. The customer is not, however, entitled to
these functions in the event of the system being replaced or serviced.
We have checked that the contents of this document correspond to
the hardware and software described. Nevertheless, differences
might exist and therefore we cannot guarantee that they are
completely identical. However, the data in this manual is reviewed
regularly and any necessary corrections included in subsequent
editions. We are thankful for any recommendations or suggestions.
We reserve the right to make technical changes.
Siemens Aktiengesellschaft