Siemens SINAMICS S120 Function Manual page 214

Basic information about the drive system
Data sets
Overview of key parameters (see List Manual)
S p0120
S p0130
S p0140
S p0170
S p0180
S p0809
S p0810
S p0811
S p0812
S p0813
S p0819[0...2]
S p0820
S p0821
S p0822
S p0823
S p0824
5-214
Power Module data set (PDS) number
Motor data set (MDS) number
Encoder data set (EDS) number
Command data set (CDS) number
Drive data sets (DDS) number
Copy command data set (CDS)
BI: Command data set selection CDS bit 0
BI: Command data set selection CDS bit 1
BI: Command data set selection CDS bit 2
BI: Command data set selection CDS bit 3
Copy drive data set DDS
BI: Drive data set selection DDS bit 0
BI: Drive data set selection DDS bit 1
BI: Drive data set selection DDS bit 2
BI: Drive data set selection DDS bit 3
BI: Drive data set selection DDS bit 4
© Siemens AG, 2005. All rights reserved
SINAMICS S120 Function Manual, 06/05 Edition