Digital Input Fcm; Pulsed Input Fcm; Pulsed Input Time Derivative Fcm - ABB 800xA Operation

Digital Input FCM

ENGU - UPPER BOUND Field
This field specifies the engineering units range upper limit. Valid entry is a decimal
number. See the CCF User's Guide if the loop receives input from a smart device.
Digital Input FCM
INVERTED INPUTS Field
This field is used to modify the input bit patterns received by the Digital Input FCM.
Valid entry is a decimal number converted to binary bit positions, specifying which
bits are inverted

Pulsed Input FCM

ENGU - LOWER BOUND Field
This field specifies the lower limit of the engineering units range. Valid entry is a
decimal number.
ENGU - UPPER BOUND Field
This field specifies the upper limit of the engineering units range. Valid entry is a
decimal number.

Pulsed Input Time Derivative FCM

CONSTANT Field
This field specifies the scaling constant. You can choose this constant to express the
result in pulses per minute or hour, and so on. Valid entry is a decimal number.
BAD INPUTS ACCEPTED? Field
Specifies whether an input with a BAD data quality is treated as if the data quality
were GOOD. Valid entries are: NO, YES.
252
Appendix A Runtime Templates
3BUR002418-600 A