ABB 800xA Operation page 139

Section 6 Status Displays
Refer to your Subsystem Status and Diagnostics user manual for descriptions of the
codes and their meanings.
DIAGNOSTICS
The status of power up diagnostics for each module in the subsystem is reported in
this field. A description and the I/0 address of each module found in the subsystem
is provided. Refer to your Subsystem Status and Diagnostics user manual for a list
of the possible I/0 module base addresses.
When the System Integrity Module (SIM) is missing or not active, the message
NOT AVAILABLE is displayed in the SIM and SIM ERROR LOG areas.
When the subsystem includes remote I/O,
the LAN number. This number is the one configured in the node not in the database.
Figure 62. Turbo Node Subsystem Status Diagnostic Area with TRIO
Subsystem Status Display Operation
Buttons available and the actions performed by each include:
ANNUNCIATOR
CONTACT OUTPUT
ERASE SIM
3BUR002418-600 A
Turbo/Console Node Subsystem Status Display
Figure
Toggles the SIM Annunciator state ON or OFF.
Toggles the SIM Contact Output state SET or RESET.
Clears current error memory locations 01 through C8 on
the SIM.
62, then Remote I/O rows show
139