ABB 800xA Operation page 173

Section 7 I/O Displays
Name
Lan
Device
Templet
Label
PROFIBUS Device Status Area
The PROFIBUS Device area shows the device state and contains a button to display
device diagnostics and information. Select the PROFIBUS Device box to select the
Get Diagnostics or Get Device Info display,
State
Get
Diagnostics
Get Device
Info
3BUR002418-600 A
The controller subsystem part of the logical name created during
database configuration.
This field represents the number of the Local Area Network (LAN)
for all the stations shown. For the AC 460 this is LAN # 1 - 4.
Go back to the controller display to select a different LAN.
This field represents the device number.
Go back to the LAN display to select a different device.
The logical device name created during database configuration is
given in this field.
Descriptive label associated with templet.
This field shows the status of the
ACTIVE indicates the
READY indicates a transient state on the way to becoming
ACTIVE.
FAILED means the
MISSING means there is not an
UNKNOWN is an indeterminate state, sometimes seen as a
transient state as the station changes state.
Select this to get vendor specific device-related diagnostic codes,
Figure 76
. You may also get vendor specific device diagnostics by
selecting the device detail. See the vendor's documentation to
interpret device-related diagnostic hexadecimal codes.
Select this to get device information,
PROFIBUS Device Display
Figure 76.
device
.
device
is in use.
device
has stopped.
device
Figure 76
connected.
.
173