ABB 800xA Operation page 123

Section 6 Status Displays
Subsystem Types
The available subsystem types (shown above icon on icon views and in the heading
line of the corresponding Subsystem or I/O Status Display) include:
Address
The device number address for an Advant Station, AC410, AC460, Console, Data
Processor Subsystem, DCN/DCN Interface, or Gateway Interface is determined by
configuration. Subdevice numbers, for the Controller Subsystem only, are
determined by the module position in the controller card file and are shown in the
Subsystem Status Display.
Subsystem Name
The subsystem name shown for each icon of the System Status Display is the 21
character name entered in the TEMPLET NAME field when that subsystem was
configured.
Subsystem Status
The status of each subsystem DCN connection is indicated by its color coded status
boxes. The number of status boxes depends on the type of subsystem. CONSOLE,
DATA PROCESSOR, and GATEWAY icons contain two status boxes that indicate
the status of D/M Module 1 and 2. CONTROLLER icons contain two status boxes
that indicate the status of D/F Module 1 and 2 and up to 12 status boxes that indicate
3BUR002418-600 A
ADVANT STATION
COMPACT STATION Advant Controller 410 (AC410) Subsystem
PROCESS STATION
CONSOLE
CONTROLLER
DATA PROCESSOR
DCN2DCN
GATEWAY
UNKNOWN
Advant Station
Advant Controller 460 (AC460) Subsystem
Console Subsystem
Controller Subsystem
Turbo Subsystem
DCN/DCN Interface
Ethernet Interface
Subsystem not identifiable
System Status Display
123