Suzuki SY413 Service Manual page 1565

3C1-18 AIR BAG STEERING WHEEL AND COLUMN
1. Junction/fuse block
1. Junction/fuse block
1. Yellow connector (for air bag)
2. White connector (for auto cruise)
1. Hole cover
7) Connect three connectors for ignition switch wire harness from
junction/fuse block.
8) If contact coil and combination switch assembly is removed,
install contact coil and combination switch assembly.
Refer to "Contact Coil and Combination Assembly" earlier in
this section.
9) If contact coil and combination switch assembly is not re-
moved, follow the procedures below.
D Connect three connectors for contact coil and combination
switch wire harness to junction/fuse block.
D Connect yellow connector (for air bag) and white 4-P con-
nector (for auto cruise, optional).
D Fix wire harness with clamp and band.
3. Band
4. Clamp
10) Install hole cover.
11) If steering wheel is removed, install steering wheel. Refer to
"STEERING WHEEL" earlier in this section.
12) Connect negative battery cable.
13) Enable air bag system. Refer to "Enabling Air Bag System" un-
der "Service Precautions" earlier in this section.