Suzuki SY413 Service Manual page 1428

1A-12 HEATER AND VENTILATION
8) Pull out heater core from unit.
1. Heater core
INSTALLATION
Reverse removal procedure for installation, and then noting the fol-
lowing instructions.
D When installing each part, be careful not to catch any cable or
wiring harness.
D When installing steering column assembly, refer to "Steering
Column" in SECTION 3C1.
D Adjust control cables. (Refer to "HEATER CONTROL CABLES"
in this section.)
D Fill engine coolant to radiator.
D If equipped with air bag, enable air bag system. Refer to "Enab-
ling Air Bag System" in SECTION 9J.