Siemens SINUMERIK 802D sl Programming Manual page 47

04.07
Fig. 3-6
G54P1...P93 (changes at Siemens Mode G505--G597 )
G58 (changes at Siemens Mode G505 )
G59 (changes at Siemens Mode G506 )
Format
Changing by G10:
G10 L2 Pp X... Y... Z... ;
p=0:
p=1 to 6:
X, Y, Z:
G10 L20 Pp X... Y... Z... ;
© Siemens AG 2007 All rights reserved
SINUMERIK 802D sl/840D/840D sl/840Di/840Di sl/810D ISO Milling (PGM) - - 04.07 Edition
Channelspecific Basic Frames
$P_CHBFRAME[3]
$P_CHBFRAME[2]
$P_CHBFRAME[1]
$P_CHBFRAME[0]
$P_CHBFRAME[0]
ISO-dialect coordinate systems
External workpiece zero point offset value (EXOFS)
Workpiece zero point offset value correspond to workpiece coordi-
nate system G54 to G59
Workpiece zero point offset for each axis in case of absolute com-
mand (G90).
Value to be added to the set workpiece zero point offset for each
axis in case of an incremental command (G91).
Movement Control Commands
3.1 The coordinate system
progr. Frame
$P_BFRAME
adjustable Frame G54 - G59 NV
$P_UIFR G54 P1..93 NV
G68 3DRot
G68 2DRot / 3DRot
G51.1 Mirror image at progr. axis
G92 set value
EXOFS
G52 NV
G51 scale
3-47