Siemens SINUMERIK 802D sl Programming Manual page 238

Machine and Setting Data
D.4 Channel-specific setting data
42520
SD number
Default setting: 0
Change effective immediately
Data type: DOUBLE
Meaning:
42522
SD number
Default setting: 0
Change effective immediately
Data type: DOUBLE
Meaning:
42524
SD number
Default setting: 0
Change effective immediately
Data type: DOUBLE
Meaning:
42526
SD number
Default setting: 0
Change effective immediately
Data type: DOUBLE
Meaning:
43340
MD number
Default setting:
Changes effective immediately
Data type: DOUBLE
Meaning:
D-238
CORNER_SLOWDOWWN_START
Distance before corner
Minimum input limit 0
Protection level: 7/7
Path length as from which the feed before the corner at G62 is reduced.
CORNER_SLOWDOWN_END
Distance after corner
Minimum input limit: 0
Protection level: 7/7
Path length as from which the feed after a corner at G62 remains reduced.
CORNER_SLOWDOWN_OVR
Feed override at corner with G62
Minimum input limit: 0
Protection level: 7/7
Override by which the feed at the corner G62 is multiplied.
CORNER_SLOWDOWN_CRIT
Criterium for corner detection with G62
Minimum input limit: 0
Protection level: 7/7
Angle as from which a corner at feed reduction with G62, G21 is taken into account.
EXTERN_REF_POSITION_G30_1
Reference point position for G30.1
Minimum input limit:
Protection level:
Setting data
Reference point position for G30.1.
This setting data is evaluated in CYCLE328.
SINUMERIK 802D sl/840D/840D sl/840Di/840Di sl/810D ISO Milling (PGM) - - 04.07 Edition
Maximum input limit: arbitrary
Unit POSN_LIN
Applies with effect from SW version: 6
Maximum input limit:: arbitrary
Unit: POSN_LIN
Applies with effect from SW version: 6
Maximum input limit: arbitrary
Unit: PERCENT
Applies with effect from SW version: 6
Maximum input limit: arbitrary
Unit: POSN_ROT
Applies with effect from SW version: 6
Maximum input limit:
Unit:
Applies with effect from SW version:
© Siemens AG 2007 All rights reserved
04.07