Data Fields, Lists; Machine Data; E.1 Machine Data - Siemens SINUMERIK 802D sl Programming Manual

Data Fields, Lists

E.1

Machine data

Number
General ($MN_ ... )
10604 WALIM_GEOAX_CHANGE_MODE
10615 NCFRAME_POWERON_MASK
10652 CONTOUR_DEF_ANGLE_NAME
10654 RADIUS_NAME
10656 CHAMFER_NAME
10704 DRYRUN_MASK
10706 SLASH_MASK
10715 M_NO_FCT_CYCLE[n]: 0, ..., 0
10716 M_NO_FCT_CYCLE_NAME[ ]
10717 T_NO_FCT_CYCLE_NAME
10718 M_NO_FCT_CYCLE_PAR
10719 T_NO_FCT_CYCLE_MODE
10760 G53_TOOLCORR
10800 EXTERN_CHAN_SYNC_M_NO_MIN
10802 EXTERN_CHAN_SYNC_M_NO_MAX
10804 EXTERN_M_NO_SET_INT
10806 EXTERN_M_NO_DISABLE_INT
10808 EXTERN_INTERRUPT_BITS_M96
10810 EXTERN_MEAS_G31_P_SIGNAL
10814 EXTERN_M_NO_MAC_CYCLE
10815 EXTERN_M_NO_MAC_CYCLE_NAME
10818 EXTERN_INTERRUPT_NUM_ASUP
10820 EXTERN_INTERRUPT_NUM_RETRAC
10880 EXTERN_CNC_SYSTEM
© Siemens AG 2007 All rights reserved
SINUMERIK 802D sl/840D/840D sl/840Di/840Di sl/810D ISO Milling (PGM) - - 04.07 Edition
Identifier Name
Work area limitation when switching geometri-
cal axes
Delete global base frames on Power On
Definable name for angle in the contour short
description
Definable name for radius non- -modally in the
contour short description
Definable name for chamfer in the contour
short description
Activating dry run feed
Activating the block skip function
M function number for tool change cycle call
Name of tool- -changing cycle for M functions-
from MD $MN_MFCT_CYCLE
Name for tool- -changing cycle with T no.
M function substitution with parameters
Parameterization of T function substitution
Behaviour of G53, G153 and SUPA
First M code for channel synchronization
Last M code for channel synchronization
ASUP activation M code
ASUP deactivation M code
Interrupt program execution (M96)
Measuring input assignment for G31 P..
Macro call via M function
UP name for M function macro call
Interruptnumber for ASUP start (M96)
Interruptnumber for retract (G10.6)
External control system whose programs are
to be executed
E
Refer-
ence
K2
E-239