Axis-Specific Setting Data - Siemens SINUMERIK 802D sl Programming Manual

Machine and Setting Data
D.3 Axis-specific setting data
D.3

Axis-specific setting data

43120
MD number
Default setting: 1
Changes effective IMMEDIATELY
Data type: DWORD
Meaning:
43240
MD number
Default setting: 0
Changes effective IMMEDIATELY
Data type: DOUBLE
Meaning:
D-236
DEFAULT_SCALE_FACTOR_AXIS
Default axial scale factor for G51 active
Minimum input limit: - -99999999
Protection level: 7/7
This machine data applies in combination with external programming languages. It is
effective with $MN_MM_EXTERN_LANGUAGE = 1.
If no axial scale factor I, J or K is programmed in the G51 block,
DEFAULT_SCALEFACTOR_AXIS is effective.
This MD is valid only if MD AXES_SCALE_ENABLE is set.
M19_SPOS
Position of spindle (degree) when commanding M19
Minimum input limit: - -359.999
Protection level: 7/7
Das Settingdatum ist auch im Siemens- -Mode wirksam.
SINUMERIK 802D sl/840D/840D sl/840Di/840Di sl/810D ISO Milling (PGM) - - 04.07 Edition
Maximum input limit: 99999999
Unit: - -
Applies with effect from SW version: 5.2
Maximum input limit: 359.999
Unit: - -
Applies with effect from SW version: 5.2
© Siemens AG 2007 All rights reserved
04.07