Siemens SINUMERIK 802D sl Programming Manual page 228

Machine and Setting Data
D.2 Channel-specific machine data
20150
MD Number
Default setting: 2, 0, 0, 1, 0, ...
Changes effective after RESET
Data type: BYTE
Bedeutung:
D-228
GCODE_RESET_VALUES
Initial setting of G groups
Minimum input limit: - -
Protection level: 2/7
Definition of G codes which become active on runup and reset or at part program end.
The index of the G codes in the respective groups must be programmed as the default
value.
Title Group
GCODE_RESET_VALUES[0]
GCODE_RESET_VALUES[1]
GCODE_RESET_VALUES[2]
GCODE_RESET_VALUES[3]
GCODE_RESET_VALUES[4]
GCODE_RESET_VALUES[5]
GCODE_RESET_VALUES[6]
GCODE_RESET_VALUES[7]
GCODE_RESET_VALUES[8]
GCODE_RESET_VALUES[9]
GCODE_RESET_VALUES[10]
GCODE_RESET_VALUES[11]
GCODE_RESET_VALUES[12]
GCODE_RESET_VALUES[13]
GCODE_RESET_VALUES[14]
GCODE_RESET_VALUES[15]
...
SINUMERIK 802D sl/840D/840D sl/840Di/840Di sl/810D ISO Milling (PGM) - - 04.07 Edition
Maximum input limit: - -
Unit: - -
Applies with effect from SW version:
Default
1 2 (G01)
2 0 (inaktiv)
3 0 (inaktiv)
4 1 (START FIFO)
5 0 (inaktiv)
6 1 (G17) bei Fräsen
7 1 (G40)
8 1 (G500)
9 0 (inaktiv)
10 1 (G60)
11 0 (inaktiv)
12 1 (G601)
13 2 (G71)
14 1 (G90)
15 2 (G94)
16 1 (CFC)
© Siemens AG 2007 All rights reserved
04.07