Fcc Compliance; Manual Terminology - Motorola 700 Series Installation And Use Manual

FCC Compliance

The MVME162LX is a board-level product and is meant to be used
in standard VME applications. As such, it is the responsibility of
system integrators to to meet the regulatory guidelines pertaining
to a given application. The MVME162LX has been tested in a
representative chassis for CE class B EMC certification. Compliance
was achieved under the following conditions:
1. Shielded cables on all external I/O ports.
2. Cable shields connected to earth ground via metal shell
3. Conductive chassis rails connected to earth ground. This
4. Front panel screws properly tightened.
For minimum RF emissions, it is essential that the conditions above
be implemented. Failure to do so could compromise the FCC
compliance of the equipment containing the module.

Manual Terminology

Throughout this manual, a convention is used which precedes data
and address parameters by a character identifying the numeric
format as follows:
$
%
&
For example, "12" is the decimal number twelve, and ''$12'' is the
decimal number eighteen.
Unless otherwise specified, all address references are in
hexadecimal.
connectors bonded to a conductive module front panel.
provides the path for connecting shields to earth ground.
dollar specifies a hexadecimal character
percent specifies a binary number
ampersand specifies a decimal number
Introduction
1
1-11