Motorola 700 Series Installation And Use Manual page 131

Table A-1. ENV Command Parameters (Continued)
ENV Parameter and Options
Slave Ending Address #2
Slave Address Translation
Address #2
Slave Address Translation
Select #2
Slave Control #2
Master Enable #1 [Y/N]
Master Starting Address #1
Master Ending Address #1
Master Control #1
Master Enable #2 [Y/N]
Master Starting Address #2
Master Ending Address #2
Set Environment to Bug/Operating System
Default Meaning of Default
00000000 Ending address of the local resource that
is accessible by the VMEbus. Default is 0.
00000000 Works the same as Slave Address
Translation Address #1. Default is 0.
00000000 Works the same as Slave Address
Translation Select #1. Default is 0.
0000 Defines the access restriction for the
address space defined with this slave
address decoder. Default is $0000.
Y Yes, set up and enable the Master Address
Decoder #1.
02000000 Base address of the VMEbus resource that
is accessible from the local bus. Default is
the end of calculated local memory,
unless memory is less than 16MB, then
this register will always be set to
01000000.
EFFFFFFF Ending address of the VMEbus resource
that is accessible from the local bus.
Default is the end of calculated memory.
0D Defines the access characteristics for the
address space defined with this master
address decoder. Default is $0D.
N Do not set up and enable the Master
Address Decoder #2.
00000000 Base address of the VMEbus resource that
is accessible from the local bus. Default is
$00000000.
00000000 Ending address of the VMEbus resource
that is accessible from the local bus.
Default is $00000000.
A
A-11