Motorola 700 Series Installation And Use Manual page 122

Configure and Environment Commands
A
A-2
Parity Memory Mezzanine (PWA) Serial Number = "
Static Memory Mezzanine Artwork (PWA) Identifier = "
Static Memory Mezzanine (PWA) Serial Number = "
ECC Memory Mezzanine #1 Artwork (PWA) Identifier = "
ECC Memory Mezzanine #1 (PWA) Serial Number = "
ECC Memory Mezzanine #2 Artwork (PWA) Identifier = "
ECC Memory Mezzanine #2 (PWA) Serial Number = "
Serial Port 2 Personality Artwork (PWA) Identifier = "
Serial Port 2 Personality Module (PWA) Serial Number = "
IndustryPack A Board Identifier = "
IndustryPack A (PWA) Serial Number = "
IndustryPack A Artwork (PWA) Identifier = "
IndustryPack B Board Identifier = "
IndustryPack B (PWA) Serial Number = "
IndustryPack B Artwork (PWA) Identifier = "
IndustryPack C Board Identifier = "
IndustryPack C (PWA) Serial Number = "
IndustryPack C Artwork (PWA) Identifier = "
IndustryPack D Board Identifier = "
IndustryPack D (PWA) Serial Number = "
IndustryPack D Artwork (PWA) Identifier = "
162-Bug>
Note that the parameters that are quoted are left-justified character
(ASCII) strings padded with space characters, and the quotes (") are
displayed to indicate the size of the string. Parameters that are not
quoted are considered data strings, and data strings are right-
justified. The data strings are padded with zeros if the length is not
met.
In the event of corruption of the board information block, the
command displays a question mark ( ? ) for nondisplayable
characters. A warning message (
is also displayed in the event of a checksum
Checksum Error)
failure.
Using the option initializes the unused area of the board
I
information block to zero.
"
"
"
"
"
"
"
"
WARNING: Board Information Block
"
"
"
"
"
"
"
"
"
"
"
"
"