Siemens SINUMERIK 840C Installation Instructions Manual page 400

08.96
61020
Memory for extended overstore (channel 1) (as from SW 5)
Default value
1
61021
Memory for extended overstore (channel 2) (as from SW 5)
Default value
1
61022
Memory for extended overstore (channel 3) (as from SW 5)
Default value
0
61023
Memory for extended overstore (channel 4) (as from SW 5)
Default value
0
61024
Memory for extended overstore (channel 5) (as from SW 5)
Default value
0
61025
Memory for extended overstore (channel 6) (as from SW 5)
Default value
0
As from SW5, the function "Extended overstore" is enabled in the "Flexible memory
configuration" (fiel ncmemcfg.). The file can be edited via the MDD menu tree
Startup/Machine data/NC machine data/ETC/Flex.memory conf..
The function can be switched on or off in the channel-specific toggle field "Data for extended
overstore". If the function is switched on for a channel, for which no block buffers have been
defined, no memory is reserved. Switching on of the function requires a memory space of
approx. 50 KB per channel. As a default, the function is switched on for channels 1 and 2.
62000-
62029
Default value
0
This MD is used to define axis-specifically how many measured values can be enabled for the
function "Extended measuring".
©
Siemens AG 1992 All Rights Reserved
SINUMERIK 840C (IA)
6 NC Machine Data (NC MD), NC Setting Data (NC SD)
Lower input limit Upper input limit
0
Lower input limit Upper input limit
0
Lower input limit Upper input limit
0
Lower input limit Upper input limit
0
Lower input limit Upper input limit
0
Lower input limit Upper input limit
0
Axis 1 to axis 30
Lower input limit Upper input limit
0 700 000
6FC5197- AA50
6.10 MDs for flexible memory configuration
Power On
Units
1 approx. 50 KB
Power On
Units
1 approx. 50 KB
Power On
Units
1 approx. 50 KB
Power On
Units
1 approx. 50 KB
Power On
Units
1 approx. 50 KB
Power On
Units
1 approx. 50 KB
after SK
"Reconfigure
memory"
Units
1 measured value
Active
Active
Active
Active
Active
Active
Active
6–215