Siemens SINUMERIK 840C Installation Instructions Manual page 10

5.3 PLC configuration and PLC machine data (as from SW 3)
5.3.1 PLC configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.3.2 PLC machine data
5.4 Drive configuration and drive machine data (as from SW 3)
5.4.1 Drive configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.4.2 Drive machine data for axes (FDD) and spindles (MSD)
5.4.3 Axis/spindle start-up for the digital drive (as from SW 3)
5.5 Cycles machine data (as from SW 3)
5.6 IKA data (interpolation and compensation with tables - as from SW 3)
5.7 User displays (as from SW 3)
5.7.1 Edit list
5.8 File functions (as from SW 3)
5.8.1 1st level: Machine configuration (as from SW 3)
5.8.2 2nd level: Configuring the individual machine data areas
(as from SW 3)
5.8.3 3rd level: Configuring withing the machine data areas of
individual machine data displays (as from SW 3)
5.8.4 File functions (sequence of operation - as from SW 3)
5.8.4.1 1st level: File functions
5.8.4.2 2nd level: File functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.8.4.3 3rd level: File functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.9 Procedure for altering configurations
5.9.1 Standard installation of digital drives (as from SW 3)
5.9.2 Adding a 1-axis FDD module (as from SW 3)
5.9.3 Replacing a 1-axis FDD module with a 2-axis FDD module
(as from SW 3)
5.9.4 Replacing a 2-axis FDD module (9/18 A) with a
2-axis FDD module (18/36 A) - (as from SW 3)
5.9.5 Drive active or passive (as from SW 3)
5.9.6 Using a new motor type (as from SW 3)
5.9.7 Reinstallation of existing and new drive components using the
existing drive files (TEA3)
5.9.8 Additional information when altering the configuration
(as from SW 3)
5.10 Configuring the MDD
5.10.1 Description
5.10.2 Practical example for user adaptation list display
5.10.3 Configuring the parameter set switchover in the list display
5.10.4 Printing the list module data (as from SW 5)
6 NC Machine Data (NC MD) NC Setting Data (NC SD)
6.1 NC machine data (NC MD)
6.1.1 Entering NC machine data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.1.2 NC configuration
6.1.3 Configuring information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.1.4 Breakdown of NC MDs/drive machine data
6.2 General machine data (general data)
6.3 Channel-specific MD (channel data) . . . . . . . . . . . . . . . . . . . . . . . .
6.4 Axis-specific MD 1 (axial data 1)
6.5 Spindle-specific MD (spindle data)
6.6 Machine data bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.6.1 General MD bits (general bits) . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6.6.2 Spindle-specific MD bits (spindle bits)
6.6.3 Channel-specific MD bits 1 (channel bits)
6.6.4 Axis-specific MD bits 1 (axial bits 1)
6.6.5 Leadscrew error compensation bits (compensation flags)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . 5-18
5-18
5-20
. . . . . . . 5-22
5-22
5-23
5-24
5-27
5-28
5-30
5-31
5-33
5-33
5-34
5-35
5-37
5-37
5-38
5-40
5-42
5-42
5-44
5-45
5-46
5-47
5-48
5-49
5-50
5-51
5-51
5-53
. . . . . . . . 5-55
5-57
. . . . . . . . . 6-1
6-1
6-1
6-2
6-3
6-5
6-6
6-31
6-36
6-65
6-85
6-85
6-124
6-136
6-144
. . . . . . . . . 6-154