Siemens SINUMERIK 840C Installation Instructions Manual page 125

4 MMC Area Diagnosis
4.8.3 PCF files (up to SW 2)
Fig. 4.27
Press LOAD softkey.
LOAD
You must enter a program number which does not yet exist in the NCK memory
in the input field.
When you press the softkey OK, the PCF file is loaded into the NCK memory.
OK
If a file with this identifier already exists, the following message appears:
You overwrite the file by acknowledging with the OK softkey.
OK
Editing the PCF files:
Press the area switchover key.
Select DIAGNOSIS area.
DIAGNOSIS
Press the PLC DATA MANAGEMENT softkey.
PLC data
management
Switch to the user branch with the HOME key (the active window is marked).
Keep pressing the CURSOR keys and INPUT key in the DATA directory until you
reach the directory containing the language files. Select the language required.
You will find the PCF file you created in the SERVICES area in the selected lan-
guage directory.
You select the PCF file using the cursor and the EDIT softkey.
4–62
MACHINE PARAMETER PROGRAMM.
Start-up/SIEMENS/PLC data
PLC/data
Name
. .
DEUTSCH
ENGLISCH
ESPANOL
FRANCAIS
ITALIANO
TEA2 12258
Start-up/User/PLC data
PLC/data
Name
..
PCF1 18
LADER 0
PCF11 0
TUER1 0
SAVE EDIT LOAD
PLC error texts exist. Overwrite?
Siemens AG 2001 All Rights Reserved 6FC5197–jAA50
SERVICES DIAGNOSIS
Length Date
03–09–1993 15:46:08
Length Date
03–12–1993 11:14:00
03–12–1993 11:10:34
03–12–1993 11:02:14
03–12–1993 11:05:08
SINUMERIK 840C (IA)
09.95
11:33
OK