Siemens SINUMERIK 840C Installation Instructions Manual page 121

4 MMC Area Diagnosis
4.8.1 NC data management (up to SW 2)
During data transmission the following dialog text appears:
If a file of the same name already exists, you are asked if you want to overwrite
this file:
You acknowledge with the OK softkey.
OK
Press the softkey LOAD to load the data selected into the NCK CPU. The pass-
word must have been entered in the NCK area.
LOAD
The following dialog text appears during data transmission.
Fig. 4.25 SW 1
The Operator's Guide describes how to edit NC data.
EDIT
4–58
!!! Transmission of NC to PC active !!!
PC data exist. Overwrite ?
!!! Transmission from PC to NC active !!!
MACHINE PARAMETER PROGRAMM.
Start-up/SIEMENS/NC data
NC
Name
...
Start-up/User/NC data
NC/data
Name
..
TEA1 96145
SEA1 96145
SEA1 10440
!!! Transmission from PC to NC active !!!
Siemens AG 2001 All Rights Reserved 6FC5197–jAA50
SERVICES DIAGNOSIS
Length Date
Length Date
02–17–1993 13:21:22
02–18–1992 08:06:36
02–17–1993 13:21:44
SINUMERIK 840C (IA)
09.95
14:45
ABORT