Using the HP 81101A
The Output Screen
The Output Screen
The Output screen shows both timing and level parameters on one
screen.
To access the Output screen, press the OUTPUT softkey.
Timing Parameters
You can use the left part of the Output screen to view and control the
pulse timing parameters.
The individual timing parameters are described in more detail in the
following. All parameters can be entered in different formats.
N O T E
With the HP 81101A you can vary timing parameters without the risk of
glitches or drop outs, which could cause measurement errors. This
applies to continuous mode with timing values < 100 ms (frequency
< 10 Hz), and consecutive values between one-half and twice the
previous value.
56
Per
1.000µs Normal
Delay
0ps
Width
100.0ns
LeadE
5.00ns
TraiE
=LeadE
MODE/TRG
OFF
Offset
Amplit
50Ω into 50.0Ω
OUTPUT
LIMITS
1
MODIFY
+0.0mV
*Period
1.00V
Frequency
TRG-LEV