HP 81101A Quick Start Manual page 22

Introducing the HP 81101A Pulse Generator
Operating the HP 81101A
The Output screen allows you to specify timing and level parameters
for the signal to be generated.
Press the OUTPUT
In the left part of this screen, you can set up the timing for the signal
softkey to access
(period, pulse width, transition times, ...). The right part is for the levels
this screen. (normal or inverted signal, offset and amplitude, impedance, ...).
Furthermore, you can switch on and off the output.
Pressing SHIFT + MORE (GRAPH) when the Output screen is displayed,
toggles between the textual display and a graphical representation of the
parameters. Depending on the current cursor position (left or right part),
the timing parameters or the level parameters are visualized.
1
OFF
MODE/TRG OUTPUT
22
Per 1.000µs Normal
Delay
Width 100.0ns
LeadE 5.00ns
TraiE =LeadE
MODE/TRG
Per 1.000µs Normal
Delay 0ps
Width 100.0ns
LeadE 5.00ns
TraiE =LeadE
MODE/TRG OUTPUT
PERIOD
1.000
µs
LIMITS TRG-LEV
OFF
0ps Offset
Amplit
50Ω into 50.0Ω
OUTPUT LIMITS
OFF
1
Offset +0.0mV *OFF
Amplit 1.00V
ON
50Ω into 50.0Ω
LIMITS TRG-LEV
+11V
1
OFF
-11V
MODE/TRG
1
MODIFY
+0.0mV *OFF
1.00V ON
TRG-LEV
MODIFY
OUTPUT LIMITS
Output 1
*OFF
ON
TRG-LEV