Continuous Burst Mode
The following figure shows typical timings for trigger mode
CONTINUOUS and pulse mode BURST.
Period Source
int Osc, int PLL or Ext Clock
Characteristics
• A burst of pulse periods is repeated continuously.
• You can select the number of pulse periods per burst in the range of
• You can select single pulses or double pulses per pulse period.
• For the pulse period source you can select from
• TRIGGER OUT marks each pulse period.
• STROBE OUT rises at the start of the first pulse period in a burst, and
OUTPUT
Single Pulse
OUTPUT
Double Pulse
TRIGGER OUT
STROBE OUT
1st period
2–65536.
– internal Osc (VFO)
– internal PLL (higher accuracy)
– external CLK-IN, synchronize to rising or falling edge.
falls at the start of the last pulse period.
Burst of 3
Period
last period
Using the HP 81101A
The Mode/Trigger Screen
47