The Basic Screens - HP 81101A Quick Start Manual

The Basic Screens

The major parameters for pulse generation can be set up in only two
screens.
The Mode/Trigger screen allows you to set the fundamental operating
and trigger modes with respect to the signal required.
Press the MODE/
In this screen, you can set up the signal to be triggered or continuous,
TRG softkey to
and to be a pulse stream or a burst (several pulses followed by a pause)
access this screen.
consisting of single or double pulses.
In the lower section you can specify the frequency source for the pulse
period and the trigger source.
CONTINUOUS PULSES
Single-Pulses at Out1
Pulse-Period: internal Osc
MODE/TRG
Introducing the HP 81101A Pulse Generator
OUTPUT LIMITS
Operating the HP 81101A
MODIFY
*PulseStrm
Burst
TRG-LEV
21