Fixed Pid Setpoint 1 - Siemens MICROMASTER 440 Parameter Manual

Issue 01/06
P2201[3]

Fixed PID setpoint 1

CStat: CUT
P-Group: TECH
Defines Fixed PID Setpoint 1
There are three options available for selection of the PID fixed setpoints:
1. Direct selection
2. Direct selection + ON command
3. Binary coded selection + ON command
1. Direct selection (P0701 - P0706 = 15):
- In this mode of operation, 1 digital input selects one PID fixed setpoint.
- If several inputs are active together, the selected setpoints are summed.
- E.g.: PID-FF1 + PID-FF2 + PID-FF3 + PID-FF4 + PID-FF5 + PID-FF6.
2. Direct selection + ON command (P0701 - P0706 = 16):
- In this mode of operation the PID fixed setpoints are combined with an ON command.
- Description as for 1), except that this type of selection issues an ON command concurrent with any
setpoint selection.
- If several inputs are active together, the selected setpoints are summed.
- E.g.: PID-FF1 + PID-FF2 + PID-FF3 + PID-FF4 + PID-FF5 + PID-FF6.
3. Binary coded selection + ON command (P0701 - P0706 = 17):
- Using this method to select the fixed PID setpoint (FF-PID) allows you to choose up to 16 different
PID setpoints.
- The setpoints are selected according to the following table:
Index:
P2201[0] : 1st. Drive data set (DDS)
P2201[1] : 2nd. Drive data set (DDS)
P2201[2] : 3rd. Drive data set (DDS)
Example:
Binary coded selection :
0 % PID - FF0
P1001 PID - FF1
P1002 PID - FF2
P1003 PID - FF3
P1004 PID - FF4
P1005 PID - FF5
P1006 PID - FF6
P1007 PID - FF7
P1008 PID - FF8
P1009 PID - FF9
P1010 PID - FF10
P1011 PID - FF11
P1012 PID - FF12
P1013 PID - FF13
P1014 PID - FF14
P1015 PID - FF15
MICROMASTER 440 Parameter List
6SE6400-5BB00-0BP0
Datatype: Float
Active: Immediately
DIN4 DIN3 DIN2
0 0 0
0 0 0
0 0 1
0 0 1
0 1 0
0 1 0
0 1 1
0 1 1
1 0 0
1 0 0
1 0 1
1 0 1
1 1 0
1 1 0
1 1 1
1 1 1
Parameter Description
Min: -200.00
Unit: % Def: 0.00
QuickComm.: No Max: 200.00
DIN1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
Level
2
223