Fixed Frequency Mode - Bit 5; Bi: Fixed Freq. Selection Bit 5 - Siemens MICROMASTER 440 Parameter Manual

Issue 01/06
P1027[3]

Fixed frequency mode - Bit 5

CStat: CT
P-Group: SETPOINT
direct selection or direct selection + ON for bit 5
Possible Settings:
1 Direct selection
2 Direct selection + ON command
Index:
P1027[0] : 1st. Command data set (CDS)
P1027[1] : 2nd. Command data set (CDS)
P1027[2] : 3rd. Command data set (CDS)
Details:
See parameter P1001 for description of how to use fixed frequencies.
P1028[3]

BI: Fixed freq. selection Bit 5

CStat: CT
P-Group: COMMANDS
Defines origin of fixed frequency selection.
Index:
P1028[0] : 1st. Command data set (CDS)
P1028[1] : 2nd. Command data set (CDS)
P1028[2] : 3rd. Command data set (CDS)
Dependency:
Accessible only if P0701 - P0706 = 99 (function of digital inputs = BICO).
Details:
See P1020 (fixed frequency selection Bit 0) for most common settings.
MICROMASTER 440 Parameter List
6SE6400-5BB00-0BP0
Datatype: U16 Unit: -
Active: first confirm QuickComm.: No
Datatype: U32 Unit: -
Active: first confirm QuickComm.: No
Parameter Description
Level
Min: 1
3
Def: 1
Max: 2
Level
Min: 0:0
3
Def: 722:5
Max: 4000:0
119