Read Boot Code Version Number; Compare <Address1> <Address2> <No Of Bytes; Isp Return Codes; User Manual - Philips LPC2101 User Manual

Philips Semiconductors
Volume 1

19.8.12 Read boot code version number

Table 223: ISP Read Boot code version number command
Command
Input
Return Code CMD_SUCCESS followed by 2 bytes of boot code version number in ASCII format.
Description
19.8.13 Compare <address1> <address2> <no of bytes>
Table 224: ISP Compare command
Command
Input
Return Code CMD_SUCCESS | (Source and destination data are equal)
Description
Example

19.8.14 ISP Return codes

Table 225: ISP Return codes Summary
Return
Code
0
1
2
3
4
5

User manual

K
None
It is to be interpreted as <byte1(Major)>.<byte0(Minor)>.
This command is used to read the boot code version number.
M
Address1 (DST): Starting Flash or RAM address of data bytes to be compared.
This address should be a word boundary.
Address2 (SRC): Starting Flash or RAM address of data bytes to be compared.
This address should be a word boundary.
Number of Bytes: Number of bytes to be compared; should be a multiple of 4.
COMPARE_ERROR | (Followed by the offset of first mismatch)
COUNT_ERROR (Byte count is not a multiple of 4) |
ADDR_ERROR |
ADDR_NOT_MAPPED |
PARAM_ERROR |
This command is used to compare the memory contents at two locations.
Compare result may not be correct when source or destination address
contains any of the first 64 bytes starting from address zero. First 64 bytes
are re-mapped to flash boot sector
"M 8192 1073741824 4<CR><LF>" compares 4 bytes from the RAM address
0x4000 0000 to the 4 bytes from the flash address 0x2000.
Mnemonic
CMD_SUCCESS
INVALID_COMMAND
SRC_ADDR_ERROR
DST_ADDR_ERROR
SRC_ADDR_NOT_MAPPED
DST_ADDR_NOT_MAPPED
Rev. 01 — 12 January 2006
Chapter 19: Flash memory
Description
Command is executed successfully. Sent by ISP
handler only when command given by the host has
been completely and successfully executed.
Invalid command.
Source address is not on word boundary.
Destination address is not on a correct boundary.
Source address is not mapped in the memory map.
Count value is taken in to consideration where
applicable.
Destination address is not mapped in the memory
map. Count value is taken in to consideration
where applicable.
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
UM10161
241