Optical interface for telecommunication
The optical cables tend to come down, therefore, bending requires special attention.
Handling instructions of optical cable are as follows:
№
1
Do not insert the connector obliquely.
2
Tighten the connector when connecting.
3
Do not pull the cable.
4
Do not bend the cable.
5
Do not bend the neck of the connector.
6
Do not twist the cable.
7
Do not kink in the cable.
8
Do not put and drop on the cable.
9
Do not bend the cable to (*)mm or less in radius.
(*)Length differs from characteristics of optical cable.
Instructions
236
6 F 2 S 0 8 5 0