Stratagy Ivp8; Hardware - Toshiba Stratagy IVP8 Installation And Maintenance Manual

Stratagy IVP8

The Stratagy IVP8 voice processing circuit card
(shown at right) supports up to eight ports, and installs
in selected card slots of a Strata CTX or DK Base or
Expansion Cabinet/Key Service Unit (KSU).
Each IVP8 has been preprogrammed at the factory for
out-of-box (plug-and-play) operation on the CTX.
This includes the KSU integration and configuration
parameters, default station (extension number) User
ID mailboxes, and company greeting and instructions.
The supported systems and recommended software
versions are:
•
Strata CTX100/CTX670 — all releases
•
Strata DK16/DK16e/DK40/DK40i — all releases
•
Strata DK280/DK424/DK424i — all releases
•
Strata DK24/DK56/DK96 — Release 4
The IVP8 requires Stratagy Admin software, installed on a separate IBM-compatible Stratagy
Admin PC, for local or remote administration and maintenance.
Voice mail integration is provided by Strata CTX or DK in-band (DTMF) integration. Strata CTX,
DK40i, DK280, DK424, and DK424i can also provide integration using the Simplified Message
Desk Interface (SMDI) output of the BSIS, PIOU, PIOUS, RSSU, RSIU, or RSIS SMDI port.

Hardware

The IVP8 consists of a flash drive with approximately four hours of storage, an internal modem, a
status light, and eight voice ports with corresponding voice port status lights (see
The IVP8's two serial ports are allocated as follows: Serial Port 1 is reserved for SMDI and Port 2
for the Stratagy Admin PC connection.
Stratagy I&M 06/02
Overview
Stratagy IVP8
6036
Figure 1-2).
1-7