Toshiba Stratagy IVP8 Installation And Maintenance Manual page 132

Menus
Users Menu
Table 6-2 Options Screen Fields (continued)
Store Messages
Max (Store Messages)
Copy Messages To
Message Volume
Guests
6-10
Messages and Greetings
Whether Stratagy enables the User ID mailbox to store messages.
Certain applications require a User ID mailbox to play information only and not record
messages. To prevent Stratagy from taking messages after the User ID's greeting plays,
set Store Messages to No and Copy Messages To to blank.
Yes: This User ID mailbox may store messages.
No: This User ID mailbox may not store messages.
Note If Copy Message To has a valid User ID, the message is recorded, then stored in
the Copy Message To User ID mailbox.
Possible values: Yes, No
Default: Yes (Store Messages is On)
Maximum message length in seconds a caller is given when leaving a message.
Possible values: 0 (unlimited), 1 ~ 999 (seconds)
Default: 180 (180 seconds = 3 minutes)
User ID mailbox which receives a copy of this User ID mailbox's messages.
Note Messages can only be copied once. Stratagy does not chain copy to multiple
mailboxes.
If Store Messages is set to Yes, Stratagy stores the message in both the accessed User
ID mailbox and the Copy Messages To User ID mailbox.
If Store Messages is set to No, Stratagy stores the message only in the Copy Messages
To User ID mailbox.
Certain applications require a User ID mailbox to play information only and not record
messages. To prevent Stratagy from taking messages after the User ID's greeting plays,
set Store Messages to No and Copy Messages To to blank.
Possible values: blank, valid User ID mailbox
Default: blank (Copy Messages To is off)
Volume at which messages are played back to the user. This value can be set by the
user through the telephone, using the Play Message Controls.
Note The IVP8 does not support this feature.
Possible values: -8 (softest) ~ 8 (loudest)
Default: 0
Number of Guest User IDs the User ID can create. For each Guest User ID created, the
value decrements by 1. For example, if the Guests field was set to 5 and the user
created 3 Guest User IDs, Guests would now display 2.
0 ~ 99: Number of Guest User IDs the user can create.
-1: User cannot use the Guest User ID feature
Note The Flash does not support this feature.
Possible values: -1 (cannot use Guest User IDs) 0 ~ 99
Default: -1
Stratagy I&M 06/02