Call Transfer; Chaining; Directory; Disk Space Notification - Toshiba Stratagy IVP8 Installation And Maintenance Manual

How Stratagy Operates
Feature Programming

Call Transfer

Mailbox Feature
All Stratagy call transfers are controlled by the User ID and Extension fields (Users Menu Options
screen). Entering only the destination extension results in a supervised call transfer. Other call
transfer types are implemented with Tokens.
Note

Chaining

Mailbox Feature
Stratagy's chaining feature enables the flow of control during call processing to be directed from
one User ID to another, based on the results of dialing the Extension field (Users Menu Groups/
Chains screen).
Note
The three possible chaining conditions are Done, RNA and Busy.

Directory

Mailbox Feature
Set the box_idx parameter for the User ID Mailbox that searches the directory for user names
(default is 411). You can also designate a different mailbox for different ports.

Disk Space Notification

System-wide Feature
This feature defaults to 5% free disk space. To reset the feature, use the diskwarn parameter (values
= 1~99). The value (percentage) becomes the threshold or percentage of available disk space that
remains on the flash drive.
To receive notification when the threshold has been reached, set User ID 999's Type field (Notify
Menu) to DISK. Time intervals between notification, alternate notification destinations, etc., can
also be programmed using the Auto (Scheduling) Menu.

Distribution Lists

Mailbox Feature
Set the cmt_maxlen parameter for the time allowed for recording a list comment (defaults to 10).

Do Not Disturb

Mailbox FeatureThis feature defaults to disabled (Off).
To activate this feature, set the Do Not Disturb field (Users Menu Options Screen) to On. This
enables the user to turn this feature On or Off from the phone's dial pad. If you set the Do Not
Disturb Lock field to On, the user is prevented from changing the DND feature in this manner, and
only the Administrator can change it.
This feature can also be set to switch automatically to DND mode and back again at a certain
time/day/date, using the Auto (Scheduling) Menu.
5-12
XXXH = blind transfer to extension XXX.
XXXU = release the call to extension XXX if ring tone is detected.
The User ID can not be configured in Do Not Disturb mode.
Stratagy I&M 06/02