Displaying And Maintaining Mpls Te; Mpls Te Configuration Examples; Establishing An Mpls Te Tunnel Over A Static Crlsp - HP MSR2000 Configuration Manual

Displaying and maintaining MPLS TE

Execute display commands in any view and reset commands in user view.
Task
Display information about explicit paths.
Display link and node information in an IS-IS
TEDB.
Display sub-TLV information for IS-IS TE.
Display network information in an IS-IS TEDB.
Display IS-IS tunnel interface information.
Display DS-TE information.
Display bandwidth information on MPLS
TE-enabled interfaces.
Display MPLS TEDB information.
Display information about MPLS TE tunnel
interfaces.
Display link and node information in an OSPF
TEDB.
Display network information in an OSPF TEDB.
Display OSPF tunnel interface information.
Display information about tunnel bundle interfaces
and their member interfaces.
Reset the automatic bandwidth adjustment
function.

MPLS TE configuration examples

Establishing an MPLS TE tunnel over a static CRLSP

Network requirements
Router A, Router B, and Router C run IS-IS.
Establish an MPLS TE tunnel over a static CRLSP from Router A to Router C.
The MPLS TE tunnel requires a bandwidth of 2000 kbps. The maximum bandwidth of the link that the
tunnel traverses is 10000 kbps. The maximum reservable bandwidth of the link is 5000 kbps.
Command
display explicit-path [ path-name ]
display isis mpls te advertisement [ [ level-1 | level-2 ] |
[ originate-system system-id | local ] | verbose ] *
[ process-id ]
display isis mpls te configured-sub-tlvs [ process-id ]
display isis mpls te network [ [ level-1 | level-2 ] | local |
lsp-id lsp-id ]* [ process-id ]
display isis mpls te tunnel [ level-1 | level-2 ] [ process-id ]
display mpls te ds-te
display mpls te link-management bandwidth-allocation
[ interface interface-type interface-number ]
display mpls te tedb { { isis { level-1 | level-2 } | ospf area
area-id } | link ip-address | network | node [ local |
mpls-lsr-id ] | summary }
display mpls te tunnel-interface [ tunnel number ]
display ospf [ process-id ] [ area area-id ] mpls te
advertisement [ originate-router advertising-router-id |
self-originate ]
display ospf [ process-id ] [ area area-id ] mpls te network
[ originate-router advertising-router-id | self-originate ]
display ospf [ process-id ] [ area area-id ] mpls te tunnel
display tunnel-bundle [ number ]
reset mpls te auto-bandwidth-adjustment timers
87